HANI GHALI

2804 Glenhaven Dr. McKinney TX 75071

CELL# (201)243-8198

Work experience:

 

08/2014 to present                                 CPY Engineers                           Senior Civil CAD Designer

                                                          Dallas, TX                                (40 hours/week)

Primary Duties:

I’m working with the Aviation Department assisting the Engineers in the Airfield Electrical, Taxiway design that is done for Alliance and Richmond VA airport. The civil work for Richmond VA includes (Runway and Taxiway repairs), service road mill & overlay design, new road design, new Water line piping layout design. Also, completed GEOPAL civil course.

03/2012 to 8/2013                                 IH engineers PC                    Senior Structural CAD designer
                                                                  Princeton, NJ                      Full Time employment (40 Hours/week)

Primary Duties:

Contract 2 & 3 of Rt. 72 Manahawkin bridges, This job was for deck and beams repairs also replacing joints at piers and abutments.

Major Deegan, steel bridge repairs.

GSP bridge rehabilitation and deck replacement. This project involves two bridges deck replacement at MP 151.2 & 162.5. My primary duty is setting up the geometry of both bridges using field survey points and setting up all drawings including CAD standard according to the NJTA.

Bayonne Bridge. IH Engineers Company was responsible for the design of the railing and the anti-clime fence. I was involved in this project that was requiring the use of Auto Cad 2012.

 

11/2008 to 12/2010                  Gannett Fleming, Inc.                            Structural CAD Designer

                                                   Mount Laurel, NJ                          Full Time Employment (40 Hours/week)

Primary duties: 

Summit Avenue Bridge over I-80 & Rout 17, Seven Spans Deck Replacement, NJDOT Bridge – Seven Spans Bridge Rehabilitation; reproduce existing bridge details referring to existing bridge shop drawings, field measurements and As-Built, using CAD MicroStation V8. Also, I prepared deck design calculations & calculations for top of deck elevations and other geometry using EXCEL.

Rout 18a George Street Bridge Rebuild, NJDOT Bridge – member of engineering staff who helped build George Street Bridge, Rout 18 New Brunswick, NJ. All drawings was done using CAD MicroStation V8

6-9 NJTPK Widening – this project for NJ Turnpike, involved many engineering groups, I was mainly involved in the Highway and Structural engineering work. My main duties were producing the structural drawings for the retaining walls in addition to the roadway work using CAD MicroStation V8.

GSP Widening-142, NJDOT- phase C project which contain multiple new bridges, I was involved in producing drawings and reviewing the shop-drawings in addition to calculating some concrete quantities for approach slabs, abutments & abutment wings.

MHD I-91 ITS – the project was involve design the structural foundation for 31 High-Masters up to 100 feet high for MASS Department of Transportation. This project was designed using AutoCAD 06 software.

 

01/2007 to 07/2008                  Pennoni Associates, Inc.                               Civil CAD Designer

                                                   Philadelphia, PA                               Full time employment (40 Hours/week)

Primary duties: 

Tacony-Palmyra Bascule Span Grid Deck Replacement, Burlington County Bridge Commission – 282 feet Double Leave Bascule Bridge; reproduce existing bridge details using existing bridge shop drawings operating MicroStation V8 CAD.

 

HANI GHALI

2804 Glenhaven Dr. McKinney TX 75071

CELL# (201)243-8198

 

Continue Work experience:

. 

Balligomingo Road over Gulph Creek, Sec 99S, PennDOT – Simple Span Pre-stressed Spread Box Beam Bridge; completed final set of construction drawings using CAD MicroStation V8.

US-I322 over East Branch of Brandywine Creek, PennDOT – 3-span Continuous Prestressed PA-Bulb T- Beams prepared plan sheets for TS&L submission using CAD MicroStation V8.

SR4002 over Reeseville Creek, PennDOT- Simple Span Spread Box Beam Bridge; prepared plan sheet for submission using CAD Microstation V8.

Foxwoods Casino Entrance Bridge – Simple Span Spread Box Beam Bridge; completed final set of construction drawings using AutoCAD

 

07/2005 to 01/2007                   KS Engineering, PC.                                      CAD Designer, Surveyor

                                                       Newark, NJ                                Full Time Employment (40 Hours/Week)

Primary duties:

I was working with civil Dep. Preparing highway project for NJDOT using CAD Microstation (J7). Also, I worked with the structure Dep. Preparing bridges detail plane for NYSDOT using AutoCAD 04 and working with GIS Dep. Preparing outfall mapping for NJTPK & GSP. I was a member of the survey crew doing bridges and High Mast towers inspection for NJTPK, NJNYPA and Betsy Ross Bridge inspection for DRPA.

 

10/2000 to 9/2007                         JMG Corp.                                            Corporate Partner & operational manager

                                                       Swedesboro, NJ                                      Full time working till December 2004

JMG is a family owned and operated corporate business. It is a general contractor construction company that provides service for existing and new homes.

 

Primary duties:

Prepare and submit proposals and project cost estimates. Prepare budget projections, zoning & permits, interviewing and hiring workers and contractors. Inspect field work and follow up with clients for insuring customer’s satisfaction.
 

EDUCATIONS:

-Associate degree in engineering designing technology, Camden County College.

SKILLS & TRAININGS: 

* CEO for Construction Business for over 7 years

* Proficient in AutoCAD

* Proficient in Microstation V8 2004 & V8i             

* Complete Architecture CAD project               

 

HONERS:

DEAN’S LIST                                spring 2003 and fall 2003